function writeint(byte eepromaddr,int addr, float data) returns int
{
if write(eepromaddr,addr)
{
i2c.write(data shr 56);
if ((addr+1) % Pagewrite)==0
{i2c.stop();
if not write(eepromaddr,addr+1) {lasterr=0x70001;return 0;}
}
i2c.write(data shr 48);
if ((addr+2) % Pagewrite)==0
{i2c.stop();
if not write(eepromaddr,addr+2) {lasterr=0x70002;return 0;}
}
i2c.write(data shr 40);
if ((addr+3) % Pagewrite)==0
{i2c.stop();
if not write(eepromaddr,addr+3) {lasterr=0x70003;return 0;}
}
i2c.write(data shr 32);
if ((addr+4) % Pagewrite)==0
{i2c.stop();
if not write(eepromaddr,addr+4) {lasterr=0x70004;return 0;}
}
i2c.write(data shr 24);
if ((addr+5) % Pagewrite)==0
{i2c.stop();
if not write(eepromaddr,addr+5) {lasterr=0x70005;return 0;}
}
i2c.write(data shr 16);
if ((addr+6) % Pagewrite)==0
{i2c.stop();
if not write(eepromaddr,addr+6) {lasterr=0x70006;return 0;}
}
i2c.write(data shr 8);
if ((addr+7) % Pagewrite)==0
{i2c.stop();
if not write(eepromaddr,addr+7) {lasterr=0x70007;return 0;}
}
i2c.write(data);
i2c.stop();
return -1;
}
lasterr=0x70000;
return 0;
}
{
float data;
if read(eepromaddr,addr)
{
data = i2c.read();
data = (((((((((((((data shl 8) or i2c.read()) shl 8) or i2c.read()) shl 8 ) or i2c.read()) shl 8) or i2c.read())
shl 8) or i2c.read()) shl 8) or i2c.read()) shl 8) or i2c.readlast();
i2c.stop();
return data;
}
lasterr=0x3000;
return 0;
}
Leider wird aus 25.26 ein 25.00 nach dem lesen , kann man keine floats speichern ?
Gruss JackFrost
Antwort schreiben
Antworten:
Re: Float speichern (von JackFrost - 13.05.2005 0:16)Re: Float speichern (von Cris - 13.05.2005 8:07)